Post by super143 on Nov 21, 2018 6:36:03 GMT
What is hp 6978 error 0x6100004a ?
It is called so because it consists of both alphabets as well as numeric characters. If you have a printer and you use it regularly, you must have come across many such alphanumeric errors. The x in the error may either be alphabets or numbers. This type of alphanumeric errors is mostly related to the ink system failures of printers. This error may occur either due to damage to any part of the printer or due to a software error.
1.Clean the ink cartridge vents and contacts
2.Gather the following materials:
3.A pin to clean any clogged vents
4.A clean, lint-free cloth
5.A clean, dry cotton swab
6.Distilled or bottled water
CAUTION:
1.Do not use tap water because it might contain contaminants that can damage the printhead.
2.Turn on the printer.
3.Open the ink cartridge access door.
4.To remove the ink cartridge, press the tab on the front of the ink cartridge to release it, and then remove it.
Figure : Example of removing an ink cartridge from the printhead
Hp printer error 0x6100004a
Example of removing an ink cartridge from the printhead
Place the ink cartridges on a clean piece of paper with the ink opening pointing up.
CAUTION:
Do not leave the ink cartridges outside the printer longer than 30 minutes. Doing so can result in damage to both the printer and the ink cartridges.
If an orange tab is attached to any ink cartridge, remove it.
Figure : Example of the orange tab
Example of the orange tab
Examine the vent area located on top of the ink cartridge, next to the HP logo.
Figure : Example of the vent area
Example of the vent area
If any of the ink cartridges have clogged vents, use a pin to clean the vents.
Figure : Example of a clogged vent
Example of a clogged vent
Figure : Example of a clean vent
Example of a clean vent
Use a fresh, lightly dampened, lint-free cloth to wipe any accumulated ink and debris on the copper-colored contact on the ink cartridge.
Figure : Reinserting the ink cartridge into the correct slot
Example of sliding the ink cartridge into the correct slot
Figure : Example of snapping the ink cartridge into place
Example of snapping the ink cartridge into place
Run your finger along the top of the ink cartridges to make sure none of them protrude.
If any ink cartridges protrude, press down firmly until each ink cartridge snaps into place.
1.Close the ink cartridge access door.
2.Check the printer control panel display for the error message.
3.Manually clean the printhead
4.Gather the following materials:
5.A clean, lint-free cloth
6.A clean, dry cotton swab
7.Distilled or bottled water
CAUTION:
Do not use tap water because it might contain contaminants that can damage the printhead.
Open the ink cartridge access door.
To remove the ink cartridge, press the tab on the front of the ink cartridge to release it, and then remove it.
CAUTION:
Do not leave the ink cartridges outside the printer longer than 30 minutes. Doing so can result in damage to both the printer and the ink cartridges.
Lift the latch handle on the ink carriage until it stops.
CAUTION:
Do not touch the nozzles or the electrical contacts with your fingers. Touch the electrical contact areas only with the cleaning materials.
Use a fresh, lightly dampened, lint-free cloth to wipe the electrical contact area from the bottom to the top until no new ink shows on the cloth.
Use as many fresh, lightly dampened, lint-free cloths as necessary.
Figure : Lowering the ink carriage latch handle
Lowering the ink carriage latch handle
Reinsert the ink cartridge into the matching letter and colored dot slot, then push the ink cartridge down and forward until it snaps into place.
Figure : Example of sliding the ink cartridge into the correct slot
Example of sliding the ink cartridge into the correct slot
Figure : Example of snapping the ink cartridge into place
Example of snapping the ink cartridge into place
Run your finger along the top of the ink cartridges to make sure none of them protrude.
If any ink cartridges protrude, then press down firmly until each ink cartridge snaps into place.
Close the ink cartridge access door.
Check the printer control panel display for the error message.
Website : Hp Tech Support
It is called so because it consists of both alphabets as well as numeric characters. If you have a printer and you use it regularly, you must have come across many such alphanumeric errors. The x in the error may either be alphabets or numbers. This type of alphanumeric errors is mostly related to the ink system failures of printers. This error may occur either due to damage to any part of the printer or due to a software error.
1.Clean the ink cartridge vents and contacts
2.Gather the following materials:
3.A pin to clean any clogged vents
4.A clean, lint-free cloth
5.A clean, dry cotton swab
6.Distilled or bottled water
CAUTION:
1.Do not use tap water because it might contain contaminants that can damage the printhead.
2.Turn on the printer.
3.Open the ink cartridge access door.
4.To remove the ink cartridge, press the tab on the front of the ink cartridge to release it, and then remove it.
Figure : Example of removing an ink cartridge from the printhead
Hp printer error 0x6100004a
Example of removing an ink cartridge from the printhead
Place the ink cartridges on a clean piece of paper with the ink opening pointing up.
CAUTION:
Do not leave the ink cartridges outside the printer longer than 30 minutes. Doing so can result in damage to both the printer and the ink cartridges.
If an orange tab is attached to any ink cartridge, remove it.
Figure : Example of the orange tab
Example of the orange tab
Examine the vent area located on top of the ink cartridge, next to the HP logo.
Figure : Example of the vent area
Example of the vent area
If any of the ink cartridges have clogged vents, use a pin to clean the vents.
Figure : Example of a clogged vent
Example of a clogged vent
Figure : Example of a clean vent
Example of a clean vent
Use a fresh, lightly dampened, lint-free cloth to wipe any accumulated ink and debris on the copper-colored contact on the ink cartridge.
Figure : Reinserting the ink cartridge into the correct slot
Example of sliding the ink cartridge into the correct slot
Figure : Example of snapping the ink cartridge into place
Example of snapping the ink cartridge into place
Run your finger along the top of the ink cartridges to make sure none of them protrude.
If any ink cartridges protrude, press down firmly until each ink cartridge snaps into place.
1.Close the ink cartridge access door.
2.Check the printer control panel display for the error message.
3.Manually clean the printhead
4.Gather the following materials:
5.A clean, lint-free cloth
6.A clean, dry cotton swab
7.Distilled or bottled water
CAUTION:
Do not use tap water because it might contain contaminants that can damage the printhead.
Open the ink cartridge access door.
To remove the ink cartridge, press the tab on the front of the ink cartridge to release it, and then remove it.
CAUTION:
Do not leave the ink cartridges outside the printer longer than 30 minutes. Doing so can result in damage to both the printer and the ink cartridges.
Lift the latch handle on the ink carriage until it stops.
CAUTION:
Do not touch the nozzles or the electrical contacts with your fingers. Touch the electrical contact areas only with the cleaning materials.
Use a fresh, lightly dampened, lint-free cloth to wipe the electrical contact area from the bottom to the top until no new ink shows on the cloth.
Use as many fresh, lightly dampened, lint-free cloths as necessary.
Figure : Lowering the ink carriage latch handle
Lowering the ink carriage latch handle
Reinsert the ink cartridge into the matching letter and colored dot slot, then push the ink cartridge down and forward until it snaps into place.
Figure : Example of sliding the ink cartridge into the correct slot
Example of sliding the ink cartridge into the correct slot
Figure : Example of snapping the ink cartridge into place
Example of snapping the ink cartridge into place
Run your finger along the top of the ink cartridges to make sure none of them protrude.
If any ink cartridges protrude, then press down firmly until each ink cartridge snaps into place.
Close the ink cartridge access door.
Check the printer control panel display for the error message.
Website : Hp Tech Support